Accuracy of three-dimensional measurement using a single image

Pio Iovenitti

doi:10.1117/1.601126

1 January 1997 Accuracy of three-dimensional measurement using a single image

Pio Iovenitti

Optical Engineering, Vol. 36, Issue 1, (January 1997). https://doi.org/10.1117/1.601126

The accuracy of 3-D measurement using a single image of a four-point coplanar target of known size is studied. The factors that influence accuracy are analyzed and experimental techniques are used to establish their individual effect on accuracy. Experiments show that the four-point coplanar target has two solutions for real images and that mixing these causes large errors. It is concluded that when the target is approximately parallel to the image plane, the accuracy is significantly better compared to other target orientations, and that image distance is a critical factor affecting accuracy in the depth, while the effect of the other factors on accuracy is relatively insignificant. A new calibration technique is introduced that determines an average image distance over the image plane within the depth of focus and improves accuracy at close range.

Citation Download Citation

Pio Iovenitti "Accuracy of three-dimensional measurement using a single image," Optical Engineering 36(1), (1 January 1997). https://doi.org/10.1117/1.601126

Published: 1 January 1997

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available