1 January 2000 Adaptive optical 3-D-measurement with structured light
Richard M. Kowarschik, Peter Kuehmstedt, Joerg Gerber, Wolfgang Schreiber, Gunther Notni
Author Affiliations +
The described 3-D measurement system with fringe projection applies the principle of uniform scale representation by the exclusive use of phase measurement values for the coordinates of each point. The test object is successively illuminated with a grating structure from at least three different directions with a telecentric system, where gray code is combined with five 90-deg phase shifts. A cCd camera records the intensity distribution of the fringes that appear as intersection lines on the surface of the object. This provides the linearly independent absolute phase values that are necessary for the calculation of the coordinates. Note that all coordinates (x,y,z) are determined with the same accuracy. To compensate the influence of specular reflections or shadowed areas up to 15 light projection directions can be used. Moreover, the object can be rotated around a second axis, yielding other views of the object. Thus we acquire different patches of the object that are transformed into a global coordinate system without any interactive user help. During this procedure, correlation methods or special points are not necessary. The calibration of the 3-D orientation of the second axis is realized with a special calibration body.
Richard M. Kowarschik, Peter Kuehmstedt, Joerg Gerber, Wolfgang Schreiber, and Gunther Notni "Adaptive optical 3-D-measurement with structured light," Optical Engineering 39(1), (1 January 2000). https://doi.org/10.1117/1.602346
Published: 1 January 2000
Lens.org Logo
CITATIONS
Cited by 74 scholarly publications and 6 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

3D metrology

Projection systems

Calibration

Adaptive optics

Optical testing

Phase measurement

RELATED CONTENT

A new 3D measurement method and its calibration based on...
Proceedings of SPIE (November 20 2012)
Full-hemisphere automatic optical 3D measurement system
Proceedings of SPIE (September 25 1997)
Tridimensional reconstruction using structured light systems
Proceedings of SPIE (February 10 2006)
Adaptive optical 3D measurement with structured light
Proceedings of SPIE (September 21 1999)

Back to Top