1 June 2009 Microbolometer-infrared imaging Stokes polarimeter
Author Affiliations +
Abstract
A long-wave infrared division of amplitude imaging Stokes polarimeter is presented. For the first time, to our knowledge, application of microbolometer focal plane array (FPA) technology to polarimetry is demonstrated. The sensor utilizes a wire-grid beamsplitter with imaging systems positioned at each output to analyze two orthogonal linear polarization states simultaneously. Combined with a form birefringent wave plate, the system is capable of snapshot imaging polarimetry in any one Stokes parameter (S1, S2, or S3). Radiometric and polarimetric calibration procedures for the instrument are provided, and the reduction matrices from the calibration are compared to rigorous coupled wave analysis and ray-tracing simulations. Image registration techniques for the sensor are discussed, and data from the instrument are presented, demonstrating the ability to measure intensity variations corresponding to polarized emission in natural environments. As such, emission polarimetry can be exploited at significantly reduced cost, sensor size, and power consumption over instruments based on more expensive mercury-cadmium telluride FPAs.
©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Michael W. Kudenov, J. Larry Pezzaniti, and Grant R. Gerhart "Microbolometer-infrared imaging Stokes polarimeter," Optical Engineering 48(6), 063201 (1 June 2009). https://doi.org/10.1117/1.3156844
Published: 1 June 2009
Lens.org Logo
CITATIONS
Cited by 36 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarimetry

Polarization

Calibration

Sensors

Microbolometers

Optical engineering

Staring arrays

RELATED CONTENT


Back to Top