1 July 2009 Multiscale analysis of rough groove textures for three-dimensional optical measurements
Author Affiliations +
Abstract
Two important aspects of surface engineering are measurement and analysis. While the acquisition of 3-D surface data is largely improved by optical profilometry, there has also been much research about their evaluation. Although the fractal-based or multiscale analysis of surface roughness is well known, these methods are not tailored for the characterization of the roughness of important machined surface textures produced by turning, grinding, honing, etc. In this work, a multiscale model of rough groove textures for 3-D surface measurements is introduced. Under the assumption of fractal groove profiles, the groove textures are modeled as superpositions of orthogonal ridge functions by the ridgelet packet transform. This provides a compact representation of groove textures. This allows a restoration of roughness components from accurate optical measurements, so that precise characterization can be achieved based on restoration. This method is validated for restoration of honing textures for real optical surface measurements on a cylinder liner.
©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Binjian Xin "Multiscale analysis of rough groove textures for three-dimensional optical measurements," Optical Engineering 48(7), 073602 (1 July 2009). https://doi.org/10.1117/1.3158991
Published: 1 July 2009
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal to noise ratio

Fractal analysis

Wavelets

Optical testing

3D modeling

Radon transform

Optical engineering

RELATED CONTENT

3D inpainting using sparse representations
Proceedings of SPIE (September 04 2009)
Self-similar set identification in the time-scale domain
Proceedings of SPIE (October 11 1994)

Back to Top