1 June 2001 Out-of-plane vibration measurement by speckle photography using photorefractive BaTiO3 crystal
K. S. Dharmsaktu, Arvind Kumar, Kehar Singh
Author Affiliations +
The present work describes the measurement of small out-ofplane vibrations in quasi real time using a photorefractive crystal as a medium for recording speckle patterns. Vibrating circular fringes are generated by interference between the reconstructed speckles recorded for a stationary object beam, and vibrating speckles transmitted through a BaTiO3 crystal after introducing a small out-of-plane shift in the diffuser position. Vibration amplitudes, of the order of the wavelength of light, have been measured by counting of fringes evolving from, and sinking into the center of the circular fringe pattern at the observation plane. The vibration frequency is measured by the number of times the change takes place in the fringes from evolution to sinking mode per unit time. Object vibration in an arbitrary direction is also analyzed and found to produce similar results.
©(2001) Society of Photo-Optical Instrumentation Engineers (SPIE)
K. S. Dharmsaktu, Arvind Kumar, and Kehar Singh "Out-of-plane vibration measurement by speckle photography using photorefractive BaTiO3 crystal," Optical Engineering 40(6), (1 June 2001). https://doi.org/10.1117/1.1370556
Published: 1 June 2001
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Speckle

Diffusers

Speckle pattern

Vibrometry

Photography

Fringe analysis

Back to Top