1 August 2001 Simple method to calculate the radial energy and temperature distributions in diode-pumped solid-state laser rods
Wenjie Xie, Siu Chung Tam, Yee Loy Lam
Author Affiliations +
The major limiting factor in scaling solid state laser average power is thermal heating. A simple and effective solution, which is used to obtain pump and temperature distributions in the laser rod using an approximate formula to calculate the absorption of the pump ray in the rod, is provided. The calculated data fit well with the experimental data, which are obtained from an IR camera. This analysis can provide valuable data for efficient coupling of pump source and subsequent correction of the thermal distortion inside the laser resonator. Most important, one can clearly observe temperature distribution in the rod and temperature difference between the center and edge of the rod with an IR camera, which benefits adjustment of the pump diodes.
©(2001) Society of Photo-Optical Instrumentation Engineers (SPIE)
Wenjie Xie, Siu Chung Tam, and Yee Loy Lam "Simple method to calculate the radial energy and temperature distributions in diode-pumped solid-state laser rods," Optical Engineering 40(8), (1 August 2001). https://doi.org/10.1117/1.1386374
Published: 1 August 2001
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Rod lasers

Infrared cameras

Diodes

Nd:YAG lasers

Solid state lasers

Absorption

Cameras

RELATED CONTENT


Back to Top