1 May 2002 Ray-mixing polarization errors resulting from surface aberrations in large segmented mirrors
Author Affiliations +
The use of segmented mirrors for the primary elements of large telescope systems is becoming increasingly popular owing to the cost effectiveness of the design. Likewise, the use of nonoptically flat glass in large collectors can further reduce cost. Unfortunately, both nonoptical flatness and segment misalignment result in phase errors. If the segmented mirror is not imaged at the detector plane, errors in the measured polarization state may result. We have developed a computer simulation of an optical system, using angular propagation to propagate a two-component-wave electric field from element to element. We use this simulation to study the effects of mirror surface errors on the polarization state of an optical beam. We report herein on the effects of surface warping and of segment piston and tilt on the Stokes parameters of an optical beam reflected from a segmented mirror. When Stokes parameters are averaged across the detector plane, we find no significant error in these averages due to mirror surface errors. However, Stokes parameters at points in the detector plane can have significant errors if there are significant variations in the Stokes parameters of the incident field and there are significant errors on the mirror surface.
©(2002) Society of Photo-Optical Instrumentation Engineers (SPIE)
Johnny K. Jennings and Barbara Tehan Landesman "Ray-mixing polarization errors resulting from surface aberrations in large segmented mirrors," Optical Engineering 41(5), (1 May 2002). https://doi.org/10.1117/1.1467062
Published: 1 May 2002
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Sensors

Mirrors

Reflectors

Error analysis

Segmented mirrors

Image segmentation

Back to Top