1 December 2003 Heat transfer analysis of a dynamic infrared-to-visible converter
Author Affiliations +
Abstract
We propose to use the rare-earth-doped silica as the IR-to-visible converter. Its principle of operation employs the up-conversion on pumping with the near-IR radiation. A time-dependent 3-D heat transfer model for fiber geometry, incorporating the finite element method appropriate to the fiber geometry, is developed to perform the resolution analysis. The simulation results of the study demonstrate the spatial and temporal resolution of this transducer for the constant and impulse irradiation profile, confirming the concept feasibility. The performance in terms of temporal and spatial resolution is appreciably improved when the Er-doped silica fiber is in contact with a cold reservoir. The cold sink also enhances the speed of device response, as the latent image is quickly erased.
©(2003) Society of Photo-Optical Instrumentation Engineers (SPIE)
Jaime A. Sandoval Gonzalez and Marija Strojnik "Heat transfer analysis of a dynamic infrared-to-visible converter," Optical Engineering 42(12), (1 December 2003). https://doi.org/10.1117/1.1625376
Published: 1 December 2003
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Visible radiation

Infrared imaging

Infrared radiation

3D modeling

Optical fibers

Silica

Spatial resolution

RELATED CONTENT

A high spatial resolution infrared scene projector
Proceedings of SPIE (August 05 2015)
Heat transfer analysis of a dynamic IR-to-visible converter
Proceedings of SPIE (December 18 2002)
Dynamic Infrared Images Generator
Proceedings of SPIE (May 01 1986)
Evaluation of Er doped silica fiber as IR to visible...
Proceedings of SPIE (November 04 2004)
Feasibility concept for dynamic IR-to-visible converter
Proceedings of SPIE (August 22 2003)

Back to Top