1 May 2005 Femtosecond laser ablation for microfluidics
David Gomez, Igor Goenaga, Ion Lizuain, Milagros Ozaita
Author Affiliations +
Abstract
We present some applications of femtosecond laser ablation for microfluidics. A doubled Ti:sapphire femtosecond laser (λ=400 nm; pulse width, 90 fs; pulse energy up to 350 µJ; pulse repetition rate, 1 kHz) is used to microstructure passive microfluidic devices (channels, reservoirs, through-holes) in polymers [polymethyl methacrylate (PMMA), polyimide (PI, Kapton)] and glass (Pyrex). These materials are selected because of their extended use in the fabrication of microfluidic chips. In all cases, channels of some tenths of micrometers are obtained with a good-quality finishing for fluid transport. In the same sense, reservoirs and holes are produced. These latter elements are fabricated in larger dimensions to combine them with channels in some presented prototypes. The well-known feature of ultrashort pulses is that no edge effects are observed because the absence of thermal effects enables a good sealing. For PMMA, polymer bonding technologies are used. For Pyrex, the well-known silicon sealing by anodic bonding is chosen. In both cases, the fabricated prototypes work properly with a good flow behavior and no leakage is observed.
©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
David Gomez, Igor Goenaga, Ion Lizuain, and Milagros Ozaita "Femtosecond laser ablation for microfluidics," Optical Engineering 44(5), 051105 (1 May 2005). https://doi.org/10.1117/1.1902783
Published: 1 May 2005
Lens.org Logo
CITATIONS
Cited by 66 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microfluidics

Femtosecond phenomena

Polymethylmethacrylate

Laser ablation

Glasses

Polymers

Semiconducting wafers

Back to Top