1 April 1983 Submicron Lithography
Phillip D. Blais
Author Affiliations +
Abstract
Narrower linewidths have been axiomatically desirable in semiconductor device geometries for over two decades, while rapid improvements in optical lithography were largely responsible for the tremendous growth rate in integrated circuits. Projecting the course of future development in lithography is perilous, however, because we are approaching serious limitations in both device design and optical lithography. This special issue of Optical Engineering is aimed at clarifying some technical factors that will affect the course of development, and it properly begins with an introduction to the subject by A. F. Tasch. Tasch carefully considers a growing awareness that registration at each edge on the etched substrate is the most important issue in nanometer lithography, and that major obstacles also exist in scaling down the size of metal oxide semiconductor (MOS) devices. A slow pace in finding solutions to device design limitations may retard the need for reducing linewidth and, in turn, profoundly affect the future course of nanometer lithography.
Phillip D. Blais "Submicron Lithography," Optical Engineering 22(2), 222175 (1 April 1983). https://doi.org/10.1117/12.7973076
Published: 1 April 1983
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lithography

Submicron lithography

Optical lithography

Semiconductors

Integrated circuits

Metals

Molybdenum

RELATED CONTENT


Back to Top