1 October 1987 Ultimate Sensitivity And Resolution Of Phosphor/Fiber/Charge-Coupled-Device Systems
Mark E. Dunham, Philip G. Sanchez
Author Affiliations +
Abstract
Charge-coupled-device imagers have great potential to replace photographic film for recording cathode ray tube (CRT) displays. The basic problem, detection of electrons impacting with variable densities on a sensing screen, implies high sensitivity for single-electron detection. Few data have been published on CCD performance in this regime, especially as one component of a complete readout system. We report on the basic sensitivity and resolution of one possible system, the electron beam and phosphor coupled with fiber optics to a thermoelectrically cooled CCD camera. Observed performance indicates that present sensitivity is several CRT beam electrons per pixel and that resolutions of 25 µm trace width present no problem. Improved experiments are expected to yield single-electron detection capability in the near future. The outlook for broad use of this readout in oscilloscopes, streak tubes, and imagers is discussed with regard to this performance.
Mark E. Dunham and Philip G. Sanchez "Ultimate Sensitivity And Resolution Of Phosphor/Fiber/Charge-Coupled-Device Systems," Optical Engineering 26(10), 261035 (1 October 1987). https://doi.org/10.1117/12.7974191
Published: 1 October 1987
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
CRTs

CCD cameras

Electrons

Imaging systems

Charge-coupled devices

Electron beams

Fiber optics

RELATED CONTENT

Imagers for digital still photography
Proceedings of SPIE (April 21 2006)
Research on effect of Kell coefficient on the quality of...
Proceedings of SPIE (October 22 2010)
Large-format imaging system
Proceedings of SPIE (May 28 1997)
Large-area interline CCD with low-dark current
Proceedings of SPIE (May 16 2003)

Back to Top