6 February 2013 Investigation in acousto-optic laser stabilization for crystal resonator-based optoelectronic oscillators
Author Affiliations +
Abstract
Potentialities are investigated for using acousto-optic cells based on a TeO2 crystal to stabilize a microwave signal generated by an optoelectronic oscillator. Bulk acoustic waves at two radio frequencies (RF) near 60 MHz are launched in the two identical cells providing a required locking on of a microwave signal. Differences between RF signals are up to 400 kHz to follow quality factor of the optic resonator typically in the range of 5×108 . Critical alignment of the two cells is performed thanks to an extraordinary polarized laser beam launched at a very low Bragg angle of light incidence. Moreover, the system is operating for any resonator to be inserted into the optoelectronic oscillator with a Q factor in the range of 2×10 710 11 .
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2013/$25.00 © 2013 SPIE
Patrice Salzenstein, Vitaly B. Voloshinov, and Arseniy S. Trushin "Investigation in acousto-optic laser stabilization for crystal resonator-based optoelectronic oscillators," Optical Engineering 52(2), 024603 (6 February 2013). https://doi.org/10.1117/1.OE.52.2.024603
Published: 6 February 2013
Lens.org Logo
CITATIONS
Cited by 20 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oscillators

Acousto-optics

Microwave radiation

Optoelectronics

Crystals

Resonators

Laser stabilization

Back to Top