10 September 2013 Multitap microwave photonic filter with positive and negative coefficients using an unbalanced Mach–Zehnder modulator
Author Affiliations +
Abstract
An approach for the implementation of microwave photonic filter with positive and negative coefficients using an unbalanced Mach–Zehnder modulator (MZM) is proposed and demonstrated. In the proposed filter, a microwave signal to be filtered is applied to the unbalanced MZM via the radio frequency port. Thanks to the unbalance between the two arms of the modulator, a π -phase shift is obtained by adjusting the wavelength spacing between the adjacent wavelengths, which leads to the generation of the positive and the negative coefficients. An equivalent experiment is performed to verify our approach. A four-tap and a six-tap microwave photonic filter with positive and negative coefficients are experimentally demonstrated. The tunability and the reconfigurability of the microwave photonic filter are also investigated.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2013/$25.00 © 2013 SPIE
Ziwei Song, Muguang Wang, Jian Sun, Tangjun Li, and Shuisheng Jian "Multitap microwave photonic filter with positive and negative coefficients using an unbalanced Mach–Zehnder modulator," Optical Engineering 52(9), 096108 (10 September 2013). https://doi.org/10.1117/1.OE.52.9.096108
Published: 10 September 2013
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microwave photonic filters

Modulators

Microwave radiation

Optical filters

Polarization

Bandpass filters

Multiplexers

RELATED CONTENT

Microwave photonic filter using air-guiding PBGF
Proceedings of SPIE (October 03 2006)

Back to Top