27 March 2014 Numerical analysis of first-order acousto-optic Bragg diffraction of profiled optical beams using open-loop transfer functions
Author Affiliations +
Abstract
In standard acousto-optic Bragg analysis, the incident light and sound beams are assumed to be uniform plane waves (with constant profiles) leading to the results based on standard weak interaction theory. As a follow-up to earlier work dealing with nonuniform incident optical beams, we revisit the problem of Bragg diffraction under nonuniform profiles, and include Gaussian, third-order Hermite–Gaussian, and zeroth-order Bessel profiles in our investigation, along with a few others. The first-order diffracted beam is examined (using a transfer function formalism based on angular spectra) under several parametric limits [such as the Klein–Cook parameter Q , the effective profile width, and the optical phase-shift parameter (α ^ 0 ) in the sound cell]. Wherever feasible, the numerical results are compared with analytic theory. The scattered first-order profile output versus the optical phase-shift appears to maintain behavior similar to the known first-order characteristics (sin 2 in intensity) encountered for the uniform incident beam case. It is observed, however, that such conformity exists seemingly only at relatively small values of Q (typically about 20 to 50). At higher Q s, on the other hand (where one would otherwise expect behavior closer to standard Bragg theory based on large Q s), it is found that the first-order intensity deviates substantially from the expected sin 2 - (or related) pattern. This deviation actually becomes more severe at even higher Q s. Additionally, the output profiles at higher Q s are also found to be distorted relative to the incident profiles. These results, though anomalous, are nevertheless generally compatible with earlier studies. Based on the transfer function theory, it is also known that for very large optical phase shifts (i.e., when α ^ 0 goes to infinity), the scattered first-order output for a Gaussian profile undergoes an axial (spatial) shift past the output plane of the sound cell. This predicted result is corroborated in our numerical simulation for both the Gaussian and third-order Hermite–Gaussian profiles, but not the zeroth-order Bessel or Airy profiles. These results provide both confirmation of some expected behavior for profiled beam scattering (including likely affirmation of the well known and unique diffractionless properties of certain Bessel beams), but also some insight into unexpected and anomalous photon-phonon interaction behavior.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2014/$25.00 © 2014 SPIE
Monish R. Chatterjee and Fares S. Almehmadi "Numerical analysis of first-order acousto-optic Bragg diffraction of profiled optical beams using open-loop transfer functions," Optical Engineering 53(3), 036108 (27 March 2014). https://doi.org/10.1117/1.OE.53.3.036108
Published: 27 March 2014
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction

Acousto-optics

Phase shifts

Numerical analysis

Bessel beams

Optical engineering

Bragg cells

Back to Top