6 June 2014 High-speed three-dimensional measurements with a fringe projection-based optical sensor
Author Affiliations +
Abstract
An optical three-dimensional (3-D) sensor based on a fringe projection technique that realizes the acquisition of the surface geometry of small objects was developed for highly resolved and ultrafast measurements. It realizes a data acquisition rate up to 60 high-resolution 3-D datasets per second. The high measurement velocity was achieved by consequent fringe code reduction and parallel data processing. The reduction of the length of the fringe image sequence was obtained by omission of the Gray code sequence using the geometric restrictions of the measurement objects and the geometric constraints of the sensor arrangement. The sensor covers three different measurement fields between 20  mm×20  mm and 40  mm×40  mm with a spatial resolution between 10 and 20 μm, respectively. In order to obtain a robust and fast recalibration of the sensor after change of the measurement field, a calibration procedure based on single shot analysis of a special test object was applied which works with low effort and time. The sensor may be used, e.g., for quality inspection of conductor boards or plugs in real-time industrial applications.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2014/$25.00 © 2014 SPIE
Christian Bräuer-Burchardt, Andreas Breitbarth, Peter Kühmstedt, and Gunther Notni "High-speed three-dimensional measurements with a fringe projection-based optical sensor," Optical Engineering 53(11), 112213 (6 June 2014). https://doi.org/10.1117/1.OE.53.11.112213
Published: 6 June 2014
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Cameras

Projection systems

Distortion

3D metrology

Calibration

3D acquisition

Back to Top