3 February 2015 Carbon-fiber-reinforced polymer variable-curvature mirror used for optical zoom imaging: prototype design and experimental demonstration
Hui Zhao, Xuewu Fan, Zhihai Pang, Guorui Ren, Wei Wang, Yongjie Xie, Zhen Ma, Yunfei Du, Yu Su, Jingxuan Wei
Author Affiliations +
Abstract
In recent years, optical zoom imaging without moving elements has received much attention. The key to realizing this technique lies in the design of the variable-curvature mirror (VCM). To obtain enough optical magnification, the VCM should be able to change its radius of curvature over a wide range. In other words, the VCM must be able to provide a large sagittal variation, which requires the mirror material to be robust during curvature variation, require little force to deform, and have high ultimate strength. Carbon-fiber-reinforced polymer (CFRP) satisfies all these requirements and is suitable for fabricating such a VCM. Therefore, in this research, a CFRP prototype VCM has been designed, fabricated, and tested. With a diameter of 100 mm, a thickness of 2 mm, and an initial radius of curvature of 1740 mm, this VCM can provide a maximum 23-μm sagittal variation and a minimum and maximum radius of curvature of 1705 and 1760 mm.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2015/$25.00 © 2015 SPIE
Hui Zhao, Xuewu Fan, Zhihai Pang, Guorui Ren, Wei Wang, Yongjie Xie, Zhen Ma, Yunfei Du, Yu Su, and Jingxuan Wei "Carbon-fiber-reinforced polymer variable-curvature mirror used for optical zoom imaging: prototype design and experimental demonstration," Optical Engineering 54(2), 025103 (3 February 2015). https://doi.org/10.1117/1.OE.54.2.025103
Published: 3 February 2015
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Actuators

Polymers

Finite element methods

Head

Modulation transfer functions

Prototyping

Back to Top