Instrumentation, Techniques, and Measurement

Development of in-plane and out-of-plane deformations simultaneous measurement method for the analysis of buckling

[+] Author Affiliations
Yasuhiko Arai

Kansai University, Faculty of Engineering Science, Department of Mechanical Engineering, 3-3-35, Yamate-cho, Suita, Osaka 564-8680, Japan

Opt. Eng. 54(2), 024102 (Feb 04, 2015). doi:10.1117/1.OE.54.2.024102
History: Received October 2, 2014; Accepted January 5, 2015
Text Size: A A A

Abstract.  In the measurement of deformation of buckling phenomenon, the optical measurement methods have been traditionally employed for performing noncontact measurement. Furthermore, because the in-plane and out-of-plane deformations simultaneously happen in the buckling phenomena, these in-plane and out-of-plane deformations must be separated precisely by analyzing some measured results of dynamic events. In traditional methods, some two-beam interferometers have been combined to measure in-plane and out-of-plane deformations as three-dimensional deformations. An ordinary two-beam interferometer is defined as the optical system that is combined by two independent interferometers. Under this definition, a new interferometer that is set up by two cameras and one laser is constructed by using the idea of a speckle interferometer that uses only two speckle patterns. Then, an analysis method for separation of in-plane and out-of-plane deformations is also proposed. In the experimental results, the high measuring accuracy of the proposed methods is confirmed. Consequently, the independency between in-plane and out-of-plane measurements in this method is confirmed. Furthermore, the new method is applied to the analysis of the buckling phenomenon. As the results, it can be confirmed that the results of the beam of buckling analysis agree very well with the theory of Euler’s buckling.

Figures in this Article
© 2015 Society of Photo-Optical Instrumentation Engineers

Citation

Yasuhiko Arai
"Development of in-plane and out-of-plane deformations simultaneous measurement method for the analysis of buckling", Opt. Eng. 54(2), 024102 (Feb 04, 2015). ; http://dx.doi.org/10.1117/1.OE.54.2.024102


Tables

Access This Article
Sign in or Create a personal account to Buy this article ($20 for members, $25 for non-members).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging & repositioning the boxes below.

Related Book Chapters

Topic Collections

Advertisement
  • Don't have an account?
  • Subscribe to the SPIE Digital Library
  • Create a FREE account to sign up for Digital Library content alerts and gain access to institutional subscriptions remotely.
Access This Article
Sign in or Create a personal account to Buy this article ($20 for members, $25 for non-members).
Access This Proceeding
Sign in or Create a personal account to Buy this article ($15 for members, $18 for non-members).
Access This Chapter

Access to SPIE eBooks is limited to subscribing institutions and is not available as part of a personal subscription. Print or electronic versions of individual SPIE books may be purchased via SPIE.org.