27 May 2015 Self-calibration of vision parameters via genetic algorithms with simulated binary crossover and laser line projection
Francisco C. Mejia-Alanis, J. Apolinar Muñoz Rodríguez
Author Affiliations +
Abstract
A self-calibration technique based on genetic algorithms (GAs) with simulated binary crossover (SBX) and laser line imaging is presented. In this technique, the GA determines the vision parameters based on perspective projection geometry. The GA is constructed by means of an objective function, which is deduced from the equations of the laser line projection. To minimize the objective function, the GA performs a recombination of chromosomes through the SBX. This procedure provides the vision parameters, which are represented as chromosomes. The approach of the proposed GA is to achieve calibration and recalibration without external references and physical measurements. Thus, limitations caused by the missing of references are overcome to make self-calibration and three-dimensional (3-D) vision. Therefore, the proposed technique improves the self-calibration obtained by GAs with references. Additionally, 3-D vision is carried out via laser line position and vision parameters. The contribution of the proposed method is elucidated based on the accuracy of the self-calibration, which is performed with GAs.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286 /2015/$25.00 © 2015 SPIE
Francisco C. Mejia-Alanis and J. Apolinar Muñoz Rodríguez "Self-calibration of vision parameters via genetic algorithms with simulated binary crossover and laser line projection," Optical Engineering 54(5), 053115 (27 May 2015). https://doi.org/10.1117/1.OE.54.5.053115
Published: 27 May 2015
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

3D vision

Genetic algorithms

3D image processing

Binary data

Computer simulations

Image processing

RELATED CONTENT


Back to Top