21 July 2015 High-repetition rate passively Q-switched Ho:YLF laser with graphene as a saturable absorber
Baoquan Yao, Xiaolei Li, Zheng Cui, Tongyu Dai, Shuang Bai, Hongyu Yang, Xiaoming Duan, Youlun Ju
Author Affiliations +
Abstract
A continuous wave (CW) Tm:YAP laser resonantly pumped Ho:YLF laser in CW mode and passive Q-switched (PQS) mode with multilayer graphene as a saturable absorber is reported. A comparison analysis of laser performances with two different output couplers is carried out. In PQS mode, an maximum average output power of 2.26 W is obtained, corresponding to a slope efficiency of 20.7%. The minimum pulse width observed is 651.9 ns with a center wavelength of 2057.16 nm with a 300-mm radius curvature and 50% transmission output coupler. Meanwhile, the maximum pulse repetition frequency of 59.2 kHz is obtained. The beam quality factor of M2 was 1.2, which is the near diffraction limit. The results show that multilayer graphene can be used as a saturable absorber in a Ho:YLF laser around a 2-μm wavelength.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286 /2015/$25.00 © 2015 SPIE
Baoquan Yao, Xiaolei Li, Zheng Cui, Tongyu Dai, Shuang Bai, Hongyu Yang, Xiaoming Duan, and Youlun Ju "High-repetition rate passively Q-switched Ho:YLF laser with graphene as a saturable absorber," Optical Engineering 54(7), 076105 (21 July 2015). https://doi.org/10.1117/1.OE.54.7.076105
Published: 21 July 2015
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Output couplers

Graphene

Continuous wave operation

Q switched lasers

Transmittance

Laser crystals

Holmium

RELATED CONTENT


Back to Top