29 September 2016 Aspherical surfaces design for extreme ultraviolet lithographic objective with correction of thermal aberration
Yan Liu, Yanqiu Li
Author Affiliations +
Abstract
At present, few projection objectives for extreme ultraviolet (EUV) lithography pay attention to correct thermal aberration in optical design phase, which would lead to poor image quality in a practical working environment. We present an aspherical modification method for helping the EUV lithographic objective additionally correct the thermal aberration. Based on the thermal aberration and deformation predicted by integrated optomechanical analysis, the aspherical surfaces in an objective are modified by an iterative algorithm. The modified aspherical surfaces could correct the thermal aberration and maintain the initial high image quality in a practical working environment. A six-mirror EUV lithographic objective with 0.33-numerical aperture is taken as an example to illustrate the presented method. The results show that the thermal aberration can be corrected effectively, and the image quality of the thermally deformed system is improved to the initial design level, which proves the availability of the method.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2016/$25.00 © 2016 SPIE
Yan Liu and Yanqiu Li "Aspherical surfaces design for extreme ultraviolet lithographic objective with correction of thermal aberration," Optical Engineering 55(9), 095108 (29 September 2016). https://doi.org/10.1117/1.OE.55.9.095108
Published: 29 September 2016
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Objectives

Lithography

Mirrors

Extreme ultraviolet lithography

Image quality

Lithium

RELATED CONTENT


Back to Top