Ultrathin EUV patterning stack using polymer brush as an adhesion promotion layer

Indira Seshadri; Anuja De Silva; Luciana Meli; Charlie Liu; Cheng Chi; Jing Guo; Kristin Schmidt; Hoa Truang; John C. Arnold; Nelson Felix; Lovejeet Singh; Tsuyoshi Furukawa; Ramakrishnan Ayothi; Angelique Raley; Richard Farrell

doi:10.1117/12.2258565

24 March 2017 Ultrathin EUV patterning stack using polymer brush as an adhesion promotion layer

Indira Seshadri, Anuja De Silva, Luciana Meli, Charlie Liu, Cheng Chi, Jing Guo, Kristin Schmidt, Hoa Truang, John C. Arnold, Nelson Felix, Lovejeet Singh, Tsuyoshi Furukawa, Ramakrishnan Ayothi, Angelique Raley, Richard Farrell

Author Affiliations +

Proceedings Volume 10143, Extreme Ultraviolet (EUV) Lithography VIII; 101431D (2017) https://doi.org/10.1117/12.2258565
Event: SPIE Advanced Lithography, 2017, San Jose, California, United States

Abstract

Initial readiness of EUV patterning has been demonstrated at the 7-nm device node with the focus now shifting to driving the 'effective' k1 factor and enabling the second generation of EUV patterning. In current EUV lithography, photoresist thicknesses <30 nm are required to meet resolution targets and mitigate pattern collapse. Etch budgets necessitate the reduction of underlayer thickness as well. Typical spin-on underlayers show high defectivity when reducing thickness to match thinner resist. Inorganic deposited underlayers are lower in defectivity and can potentially enable ultrathin EUV patterning stacks. However, poor resist-inorganic underlayer adhesion severely limits their use. Existing adhesion promotion techniques are found to be either ineffective or negatively affect the etch budget. Here, using a grafted polymer brush adhesion layer we demonstrate an ultrathin EUV patterning stack comprised of inorganic underlayer, polymer brush and resist. We show printing of sub-36 nm pitch features with good lithography process window and low defectivity on various inorganic substrates, with significant improvement over existing adhesion promotion techniques. We systematically study the effect of brush composition, molecular weight and deposition time/temperature to optimize grafting and adhesion. We also show process feasibility and extendibility through pattern transfer from the resist into typical back end stacks.

Conference Presentation

Citation Download Citation

Indira Seshadri, Anuja De Silva, Luciana Meli, Charlie Liu, Cheng Chi, Jing Guo, Kristin Schmidt, Hoa Truang, John C. Arnold, Nelson Felix, Lovejeet Singh, Tsuyoshi Furukawa, Ramakrishnan Ayothi, Angelique Raley, and Richard Farrell "Ultrathin EUV patterning stack using polymer brush as an adhesion promotion layer", Proc. SPIE 10143, Extreme Ultraviolet (EUV) Lithography VIII, 101431D (24 March 2017); https://doi.org/10.1117/12.2258565

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available