Paper
11 July 1989 Optomechanical Design Of The Grating Laser Beam Combiner (GLBC) Laser Diode Header
Jonathan A.R. Rall, Paul L. Spadin
Author Affiliations +
Abstract
A laser diode header has been fabricated for a grating laser beam combiner (GLBC). The laser diode header provides the thermal control, the drive electronics, and the optical system necessary for proper operation of the beam combiner. The diode header is required to provide diffraction limited optical performance while providing correction for worst case defocus aberration, 0.6 mrad excess divergence, and worst case decenter aberration, 1.0 mrad pointing error. The design of the header considered the mechanical design and the optical design together resulting in a small, self-contained header with 0.7 mrad range for focus correction and +1- 2.5 mrad of beam steering. The complete diode header is currently undergoing optical and mechanical performance testing.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jonathan A.R. Rall and Paul L. Spadin "Optomechanical Design Of The Grating Laser Beam Combiner (GLBC) Laser Diode Header", Proc. SPIE 1044, Optomechanical Design of Laser Transmitters and Receivers, (11 July 1989); https://doi.org/10.1117/12.951279
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Collimation

Objectives

Diodes

Lenses

Optomechanical design

Optical design

Back to Top