Paper
5 October 2018 Influence of bottom depths and bottom types on water surface reflectance
Author Affiliations +
Abstract
Two flow irradiance model solutions are tested using various bottom depths and hyperspectral in-situ bottom reflectance signatures for Elkhorn Coral, Bleached Reef, Sand, Sand and Seagrass, and Turtle Grass. Bottom reflectance signatures are used to simulate a water surface reflectance signatures from analytical solutions that can account for the effect of a collimated irradiance signal or direct sunlight within the water column. Simulated reflectance signatures are generated as a function of depth and wavelength in an optically clear water column and a turbid estuarine water column containing concentrations of chlorophyll-a, seston, and dissolved organic material. Simulated surface reflectance signatures as a function of water depth are then used to predict bottom reflectance signatures. Comparison of in-situ bottom reflectance signatures to simulated bottom reflectance signatures predicts model depth sensitivity at a 95% confidence level. Spectral window solutions for water column depths are detected for bottom types and estuarine type water column concentrations. Model can be coupled with bathymetry and high resolution water surface sensor derived reflectance signatures to monitor or map bottom variations for surveillance, environmental monitoring, fishing, or dredging applications in coastal waters or very shallow estuarine waters.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tyler A. Rotkiske and Charles R. Bostater Jr. "Influence of bottom depths and bottom types on water surface reflectance", Proc. SPIE 10784, Remote Sensing of the Ocean, Sea Ice, Coastal Waters, and Large Water Regions 2018, 107840B (5 October 2018); https://doi.org/10.1117/12.2515669
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top