Paper
29 October 1989 Optical Fibre Monitoring Of Power Circuit Breakers
G. R. Jones, E. Lewis, S. Kwan, M. Glover, P. Henderson, C. Beavan, D. Kershaw, M. Moghisi, R. Holmes
Author Affiliations +
Proceedings Volume 1120, Fibre Optics '89; (1989) https://doi.org/10.1117/12.960992
Event: Sira/Fibre Optics '89, 1989, London, United Kingdom
Abstract
The potential of optical fibre based sensing systems for monitoring physical and chemical conditions in difficult environments such as those with explosion hazards or those susceptible to electromagnetic interference is now well established (e.g. Parr et al (1987)). One such environment which is difficult to monitor fully with conventional electronic instrumentation is that of high voltage power transmission systems. Perhaps the component of such systems which imposes the most severe demands upon monitoring (and therefore is arguably the least well monitored in service) is the extra high voltage circuit breaker. The difficulties in fully monitoring these devices include the need to preserve high levels of electrical insulation (over 525 kV in the UK and higher in other parts of the world) and the need for immunity from strong magnetic fields and from severe electromagnetic interference during circuit breaker operation. A range of parameters need to be addressed which are not only electrical in nature but also thermal, mechanical, aerodynamic and chemical.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. R. Jones, E. Lewis, S. Kwan, M. Glover, P. Henderson, C. Beavan, D. Kershaw, M. Moghisi, and R. Holmes "Optical Fibre Monitoring Of Power Circuit Breakers", Proc. SPIE 1120, Fibre Optics '89, (29 October 1989); https://doi.org/10.1117/12.960992
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Colorimetry

Fiber optics

Dielectrics

Modulation

Sensors

Particles

Back to Top