Obtaining of micro-powder coatings from Fe-Ni and Fe-Cr alloys by pulse-periodic laser action

Maksim N. Khomyakov; Pavel A. Pinaev; Aleksandr L. Smirnov; Pavel A. Statsenko; Gennadiy N. Grachev

doi:10.1117/12.2550426

11 December 2019 Obtaining of micro-powder coatings from Fe-Ni and Fe-Cr alloys by pulse-periodic laser action

Maksim N. Khomyakov, Pavel A. Pinaev, Aleksandr L. Smirnov, Pavel A. Statsenko, Gennadiy N. Grachev

Proceedings Volume 11322, XIV International Conference on Pulsed Lasers and Laser Applications; 1132213 (2019) https://doi.org/10.1117/12.2550426
Event: XIV International Conference on Pulsed Lasers and Laser Applications (AMPL-2019), 2019, Tomsk, Russian Federation

Abstract

This paper presents the results of experimental research concerning the laser-plasma coating of steel substrate with the following powder grades: AP-FeCr4MnSiB (Fe_71.75C_4.81Cr_3.33Si_3.54B_14.10Mn_1.74V_0.73), AP-FeCr11Mn4SiB (Fe_66.8Mn_2.84C_2.85Si_5.3B_11.42Cr_10.79), AP-FeNi19Mn10SiB (Fe_56.12Ni_15.82C_1.65Si_4.92B_12.82Mn_8.66) and AP-G14 (Fe_29.4Ni_32.24C_5.32Cr_14.78Si_4.06B_10.22Mo_2.8W_1.16). As a focusing head was used self-made lateral nozzle for feeding powder. The nozzle was used in conjunction with scanning the laser radiation in the direction perpendicular to the movement of the focusing head. Coated tracks with various nozzle head movement speed (7-20 mm/s) was obtained. The elemental compositions of the resulting coatings were studied. Alloying elements are uniform distributed throughout the coating. During surfacing the powder particles are completely melted and partially mixed with the base material. This leads to increased iron content in the resulting coatings compared with the original powder. The hardness and thickness of the deposited layers were measured depending on the speed of the process. The hardness of the coatings is in the range of 7-12 GPa, the thickness is 0.15-0.7 mm. The wear resistance of the resulting coatings is up to 10 times higher than that of a steel substrate.

Citation Download Citation

Maksim N. Khomyakov, Pavel A. Pinaev, Aleksandr L. Smirnov, Pavel A. Statsenko, and Gennadiy N. Grachev "Obtaining of micro-powder coatings from Fe-Ni and Fe-Cr alloys by pulse-periodic laser action", Proc. SPIE 11322, XIV International Conference on Pulsed Lasers and Laser Applications, 1132213 (11 December 2019); https://doi.org/10.1117/12.2550426

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Iron

Head

Silicon

Chemical elements

Chromium

Manganese

Resistance

Show All Keywords

Keywords/Phrases

Search In:

Publication Years