Paper
13 November 2019 Research on correction method in AGV motion using inertial guidance and QR code
Wanting Song, Zai Luo, Yingqi Tang
Author Affiliations +
Proceedings Volume 11343, Ninth International Symposium on Precision Mechanical Measurements; 113431F (2019) https://doi.org/10.1117/12.2548720
Event: International Symposium on Precision Mechanical Measurements 2019, 2019, Chongqing, China
Abstract
Both the deviation position and the heading deviation of the AGV are generated by its deviation from the ideal guiding trajectory during the working process. in this paper, the method of inertial guidance and QR code are applied to correct this deviation of AGV. The position deviation and heading deviation are pretreated by performing Butterworth filtering and attitude calculation on the output of the inertial device. AGV accurately locates the four corners of QR code in the field of view and corrects the output of inertial devices to realize motion correction. The experimental results show that the posture deviation can be effectively eliminated before reaching to the next QR code positioning module. The positioning accuracy is less than 0.5 mm at a speed of 0.6 m/s.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wanting Song, Zai Luo, and Yingqi Tang "Research on correction method in AGV motion using inertial guidance and QR code", Proc. SPIE 11343, Ninth International Symposium on Precision Mechanical Measurements, 113431F (13 November 2019); https://doi.org/10.1117/12.2548720
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image restoration

Image compression

Visualization

Electronic filtering

Sensors

Servomechanisms

Gyroscopes

Back to Top