Paper
12 March 2020 Thermocouple welding joint defects detection system based on computer vision
Runze Wang, Yan Zhou, Ke Xu, Xincheng Xu, Qiong Li, Chunlin Du
Author Affiliations +
Abstract
Due to the uncertainties of manual operation, it is difficult to ensure that each joint is available for the welded joint of the thermocouple wire. The size of the thermocouple connector is also small, and it is difficult to distinguish the defect of the connector only by the human eye. This paper proposes a method of computer vision, using the camera to automatically identify defects in the thermocouple connector. Use the Candy edge detection algorithm to find the region of interest, and calculate the parameters such as the diameter of the welding joint through functions such as HoughCircles transform algorithm. Finally, the defects of the welding joint are determined according to such parameters. In this paper, the thermocouple welding joint defect detection algorithm is used to realize the automatic detection of thermocouple welding joint defect. It improves the quality of thermocouple welding joint, and the efficiency of the test personnel is also improved.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Runze Wang, Yan Zhou, Ke Xu, Xincheng Xu, Qiong Li, and Chunlin Du "Thermocouple welding joint defects detection system based on computer vision", Proc. SPIE 11438, 2019 International Conference on Optical Instruments and Technology: Optoelectronic Imaging/Spectroscopy and Signal Processing Technology, 114380K (12 March 2020); https://doi.org/10.1117/12.2543562
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Defect detection

Image processing

Computing systems

Cameras

Detection and tracking algorithms

Computer vision technology

Machine vision

Back to Top