Presentation + Paper
30 May 2023 Specialty fiber fabrication using carbon monoxide laser heating
Michael Fokine, Clarissa M Harvey
Author Affiliations +
Abstract
In this work we explore using a carbon monoxide (CO) laser towards specialty optical fiber fabrication specifically targeting the use of unconventional core materials, such as semiconductors as well as other crystalline materials, surrounded by a silica glass cladding. With laser heating there is a near instantaneous temperature response with a change in laser power. Highly localized heating minimizes overall thermal exposure reducing the duration that the core and cladding material interact at elevated temperatures. Localized heating also results in large temperature gradient across the liquid-solid interface, which is beneficial for crystallization kinetics. Compared to using CO2-lasers, the radiation from the CO-laser, which operates at 5.5 μm, has a much larger penetration depth in silica resulting in energy being deposited further into the material. This enables a more homogeneous transverse temperature distribution as well as a higher average temperature while minimizing surface vaporization. This talk covers the results from recent work using a CO laser for the fabrication of hybrid material optical fibers.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Fokine and Clarissa M Harvey "Specialty fiber fabrication using carbon monoxide laser heating", Proc. SPIE 12573, Specialty Optical Fibres, 125730D (30 May 2023); https://doi.org/10.1117/12.2669467
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Gas lasers

Silica

Beam diameter

Fabrication

Silicon

Specialty optical fibers

Glasses

Back to Top