Paper
1 November 1990 Optimal conception of an IR camera
Francois Papini, Jean-Louis Petit, Jean-Pierre David
Author Affiliations +
Abstract
This study deals with the conclusions drawn from infrared thermal analysis experiments that were carried out over a period of several years. In the context of these experiments, we analyzed the aptitude of a system to switch between two functions an imaging and a measuring system for thermal flux. Temperature measurements were not dealt with in this analysis, as temperature readings introduce numerical values associated with material properties and radiative balance that are in no way characte ristic of infrared analysis. Our analysis deals with "single-detector" motion-picture cameras fitted with a "line/column" scanning system and with signal sampling on the amplified output of the detector. The image was thus reconstituted on a micro-computer, using the pixels from the sampling data, with a numerical depth determined by the digital convertor. This analysis was conducted within the constraints imposed by calibration procedures. These constraints are particularly severe when calibrating the spatial frequencies response function (within the frequency range). This calibration leads to a study of the image's structure and of its ability to produce output values that are of the same order of those produced by a measuring device.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Francois Papini, Jean-Louis Petit, and Jean-Pierre David "Optimal conception of an IR camera", Proc. SPIE 1341, Infrared Technology XVI, (1 November 1990); https://doi.org/10.1117/12.34827
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Sensors

Spatial frequencies

Imaging systems

Calibration

Cameras

Fourier transforms

Back to Top