Paper
1 January 1992 Stable table with a gantry system for overhead beams
Graham Saxby
Author Affiliations +
Proceedings Volume 1600, Intl Symp on Display Holography; (1992) https://doi.org/10.1117/12.57810
Event: International Symposium on Display Holography, 1991, Lake Forest, IL, United States
Abstract
Many holographers either mount their subject matter on its side or, if they use an overhead reference beam, mount the reference mirror on supports on the optical table. Both methods are artistically limiting and inherently unstable. The paper describes a method of supporting an overhead reference mirror and subject illumination in a manner that is inherently stable, using a gantry constructed from scaffolding pipe with KeeKlamp connectors. This gantry system not only provides versatility in possible lighting set-ups, but also forms a frame for a novel kind of draft exclusion material, and provides a substantial contribution to the rigidity of the table itself. Examples of table layouts of varying degrees of complexity, all designed for maximum stability, are shown. Finally, methods of keeping exposure time to a minimum by careful control of both optical geometry and processing conditions are discussed.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Graham Saxby "Stable table with a gantry system for overhead beams", Proc. SPIE 1600, Intl Symp on Display Holography, (1 January 1992); https://doi.org/10.1117/12.57810
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Holograms

Holography

Beam splitters

Reflection

Sodium

Light sources and illumination

RELATED CONTENT

Difference Holographic Interferometry
Proceedings of SPIE (October 26 1983)
Experimental holography in high school teaching
Proceedings of SPIE (October 03 2000)
360-deg-viewable flat hologram
Proceedings of SPIE (February 17 1995)

Back to Top