Paper
27 July 1979 Pin Hole Detector For Mirror Finish Surface Using ITV Camera
Toshio Sakata, Morimasa Nagao
Author Affiliations +
Proceedings Volume 0189, 13th Intl Congress on High Speed Photography and Photonics; (1979) https://doi.org/10.1117/12.957646
Event: 13th International Congress on High Speed Photography and Photonics, 1978, Tokyo, Japan
Abstract
This paper describes a Pin Hole Detector designed for small surface defect detection on a mirror finish high density magnetic disk using an industrial television camera. In this system, the utilization of a silicon vidicon is successful for the line scanning method. ITV function for detector and image monitor contributes to system simplification and has various advantages in laboratory usage. For study convenience, inspection results are printed out in a list on a mapping form, indicating defect location and demensions. Detected defects are automatically aligned on the TV monitor view field, when this monitor is used for visual inspection, after specifying the desired data input through the teletypewriter unit.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Toshio Sakata and Morimasa Nagao "Pin Hole Detector For Mirror Finish Surface Using ITV Camera", Proc. SPIE 0189, 13th Intl Congress on High Speed Photography and Photonics, (27 July 1979); https://doi.org/10.1117/12.957646
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Defect detection

Signal detection

Cameras

Binary data

Sensors

Silicon

Video

RELATED CONTENT


Back to Top