Paper
3 November 1994 Fabrication of reliable x-ray mask using high-temperature deposited SiN membrane by low-pressure chemical vapor deposition system
Tsuneaki Ohta, R. Kumar, Shuichi Noda, Masanori Kasai, Hiroshi Hoga
Author Affiliations +
Abstract
The SiN membranes were deposited by using high temperature LPCVD system. The SiN films deposited over 1000 degree(s)C showed the suitable properties for X-ray mask, such as well- controlled tensile stress of 5 X 107 Pa, high optical transmittance over 95% and low impurity concentrations. The high optical transmittance of the SiN films deposited over 1000 degree(s)C was related to the high N/Si. The X-ray masks fabricated by using the SiN membranes deposited at 1000 degree(s)C showed the high optical transmittance of about 92% and X-ray durability. The pattern position displacement induced by SR irradiation was simulated using FEM calculation with qualitative agreement.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tsuneaki Ohta, R. Kumar, Shuichi Noda, Masanori Kasai, and Hiroshi Hoga "Fabrication of reliable x-ray mask using high-temperature deposited SiN membrane by low-pressure chemical vapor deposition system", Proc. SPIE 2254, Photomask and X-Ray Mask Technology, (3 November 1994); https://doi.org/10.1117/12.191942
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

Photomasks

Transmittance

Low pressure chemical vapor deposition

X-ray optics

Protactinium

X-ray technology

RELATED CONTENT


Back to Top