Paper
3 January 1996 Cross-sensitivity considerations for wavelength-modulated and interferometric optical fiber sensors
Scott A. Meller, Vivek Arya, Anbo Wang, Richard O. Claus
Author Affiliations +
Abstract
Cross-sensitivity refers to the `cross-talk' between the perturbation being monitored (strain, etc.) and the unwanted ambient physical variables. These cross-sensitivity considerations need to be resolved for realizing accurate, self-calibrated fiber sensor configurations. This paper presents an evaluation of the cross-sensitivity existing between physical variables typically measured by Bragg grating based fiber sensors and the extrinsic Fabry-Perot interferometer (EFPI) based sensors. Cross-sensitivities were investigated between the desired measurand, axial strain, and undesirable sources of error, lateral strain and temperature fluctuation. It is shown that the EFPI sensors are less susceptible to cross-sensitivity induced error than Bragg grating based optical fiber sensors. From the results obtained, it is concluded that the extrinsic Fabry-Perot sensor is a better candidate for certain applications requiring minimized cross- sensitivities, as compared with the Bragg grating-based optical fiber sensor.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Scott A. Meller, Vivek Arya, Anbo Wang, and Richard O. Claus "Cross-sensitivity considerations for wavelength-modulated and interferometric optical fiber sensors", Proc. SPIE 2594, Self-Calibrated Intelligent Optical Sensors and Systems, (3 January 1996); https://doi.org/10.1117/12.229220
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber Bragg gratings

Fiber optics sensors

Temperature metrology

Interferometry

Aluminum

Fabry–Perot interferometers

Back to Top