Paper
22 January 1982 Fiber Optics For Electromagnetic Pulse (EMP) Simulators
William M. Caton
Author Affiliations +
Abstract
Fiber optic cables were selected to transmit the command and data signals for a new EMP simulator, which will test the vulnerability of electronic systems to high intensity pulse electro-magnetic fields. The transient fields generated by the simulator induce large pulse currents in all coaxial cable and power wiring, and on the surfaces of all electronic enclosures in the vicinity of the EMP simulator sufficient to burn out unprotected electronics. Since no conductive current is induced on the all dielectric fiber optic cables, a major source of spurious signals and circuit damage was eliminated. The transmitters and receivers were essentially EMP hardened to protect from currents induced on the electronic enclosures. Two fiber optic data links transmit individual trigger signals with 1 ns rise times from the command and control center to the two Marx generators situated on either side of the center of the horizontal dipole antenna of the simulator. Two additional fiber optic links transmit, back to the command and control center, the output from probes measuring the voltage developed across the Marx generators. These analogue data links have a 5 ns rise time and a 40:1 signal to peak noise ratio. The data links are 450 m long.
© (1982) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William M. Caton "Fiber Optics For Electromagnetic Pulse (EMP) Simulators", Proc. SPIE 0296, Fiber Optics in Adverse Environments I, (22 January 1982); https://doi.org/10.1117/12.932449
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Receivers

Optical amplifiers

Transmitters

Fiber amplifiers

Fiber optics

Antennas

Optical fibers

RELATED CONTENT

A Fiberoptic Recirculating Delay Line
Proceedings of SPIE (November 28 1988)
New CATV fiber-to-the-subscriber architectures
Proceedings of SPIE (January 01 1991)
Development of dual-rate MIL-STD-1773A data bus transceiver
Proceedings of SPIE (October 18 1996)

Back to Top