Paper
17 April 1998 Minimum-stage 4x4 electro-optic polymer switch
Author Affiliations +
Abstract
Throughout the paper, the concept of the planar 1-D lay-out (one layer) of kXk-switches and the concept of its compact double-layer/multi-layer counterpart will be presented and experimental results analysed for k equals 4. The paper presents the construction and treats of the working principles of switching system that can operate with minimum number of stages. A reduction of the number of stages is obtained due to combination of the electro-optic (EO) polymer films on the isotropic substrate. The optical switches are collected in one optical layer and each layer composes of at most two 2X2- switches simultaneously active. Poly (methyl methacrylate) (PMMA) film doped with azo dye and para-nitro- aniline/polyvinyl alcohol (p-N-An/PVA) were used for the EO films preparation. Thereby switching is applied horizontally (use one layer only) and vertically (between the two layers). The scheme of such a 4X4-switch in double-layer technique has been presented.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Igor G. Voitenko and Josef Giglmayr "Minimum-stage 4x4 electro-optic polymer switch", Proc. SPIE 3281, Polymer Photonic Devices, (17 April 1998); https://doi.org/10.1117/12.305410
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Switches

Switching

Waveguides

Refractive index

Electrodes

Polymers

Electro optic polymers

RELATED CONTENT

Electro-optic polymers for optical interconnects
Proceedings of SPIE (July 01 1990)
Silicon-based digital optical switch with slot structure
Proceedings of SPIE (November 24 2009)
Electro-Optic Polymer Waveguide Devices
Proceedings of SPIE (February 08 1988)
Photonic polymers in passive and active waveguide devices
Proceedings of SPIE (February 25 1993)

Back to Top