Process monitoring during manufacturing of large-scale composite parts

Dirk Heider; Douglas A. Eckel II; Roderic C. Don; Bruce K. Fink; John W. Gillespie Jr.

doi:10.1117/12.335753

11 January 1999 Process monitoring during manufacturing of large-scale composite parts

Dirk Heider, Douglas A. Eckel II, Roderic C. Don, Bruce K. Fink, John W. Gillespie Jr.

Proceedings Volume 3538, Process Monitoring with Optical Fibers and Harsh Environment Sensors; (1999) https://doi.org/10.1117/12.335753
Event: Photonics East (ISAM, VVDC, IEMB), 1998, Boston, MA, United States

Abstract

One of the inherent problems with the processing of composites is the development of internal stresses and the resulting warpage, which results in out-of-tolerance components. This investigation examines possible fiber-optic sensor methods, which can be applied to measure internal strain and thus residual stress during production. Extrinsic Fabry-Perot Interferometers (EFPI) and Bragg gratings are utilizes to monitor the strain behavior during manufacturing of large-scale composite parts. Initially, a 24 in X 18 in X 1 in thick part was manufactured using the vacuum- assisted resin transfer molding (VARTM) technique. In this part, one Bragg grating, multiple thermocouples and a resin flow sensor (SMARTweave) were integrate to measure the flow and cure behavior during production. An AGEMA thermal image camera verified the temperature history on the part surface. In addition, several EFPI's and Bragg gratings were implemented into three temperature history on the part surface. In addition, several EFPI's and Bragg gratings were implemented into three 13 ft X 32 ft X 20.3 in civilian bridge deck test specimens manufactured with the VARTM process. The Bragg gratings showed great promise to capture the changes in strain due to the residual stress during cure. The actual implementation of fiber optics into large composite parts is a challenge and the problems of sensor survivability in these parts are addressed in this study. The fiber optic measurements in combination with SMARTweave's ability to monitor flow could lead to a sensor system, which allows feedback for process control of the VARTM technique. In addition, the optical fibers will be used for health monitoring during the lifetime of the part.

Citation Download Citation

Dirk Heider, Douglas A. Eckel II, Roderic C. Don, Bruce K. Fink, and John W. Gillespie Jr. "Process monitoring during manufacturing of large-scale composite parts", Proc. SPIE 3538, Process Monitoring with Optical Fibers and Harsh Environment Sensors, (11 January 1999); https://doi.org/10.1117/12.335753

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available