Paper
13 August 1998 Fiber geometry parameter measurement
Lei Chen, Jinbang Chen, Qingyun Wang, Rihong Zhu, Runhua Lu
Author Affiliations +
Abstract
An automatic method of measuring fiber geometry parameters is described. The parameters include core diameter, cladding diameter, core non-circularity, cladding non-circularity and core/cladding concentricity. The image of the fiber under test is received by a CCD camera and transferred to an image grabber plugged in a microcomputer for further analysis. Several digital image-processing methods are used to remove the noise in fiber image. The image segment algorithm is used to extract data points. The data is analyzed using different algorithms to give the geometry parameters of the fiber. Sophisticated software is programmed. An instrument is developed based on the hardware and software described above. All of the parameters and graphics can be obtained within 30 seconds. The repeatability of the instrument is as follows: core diameter, cladding diameter, core non- circularity, cladding non-circularity, core/cladding concentricity.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lei Chen, Jinbang Chen, Qingyun Wang, Rihong Zhu, and Runhua Lu "Fiber geometry parameter measurement", Proc. SPIE 3555, Optical and Fiber Optic Sensor Systems, (13 August 1998); https://doi.org/10.1117/12.318170
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Image processing

Image segmentation

Microscopes

CCD cameras

Image filtering

Image processing algorithms and systems

Back to Top