Paper
7 April 1999 Single-beam photothermal microscopy: a new diagnostic tool for optical materials
Author Affiliations +
Abstract
A novel photothermal microscopy (PTM) is developed which uses only one laser beam, working as both the pump and the probe. The principle of this single-beam PTM is based on the detection of the second harmonic component of the laser modulated scattering (LMS) signal. This component has a linear dependence on the optical absorptance of the tested area and a quadratic dependence on the pump laser power. Using a pump laser at the wavelengths of 514.5- and 532-nm high-resolution photothermal scans are performed for polished fused silica surfaces and a HfO2/SiO2 multilayer coatings. The results are compared with those from the traditional two-beam PTM mapping. It is demonstrated that the single-beam PTM is more user-friendly than conventional two-beam PTM and, offers a higher spatial resolution for defect detection.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhouling Wu, Michael D. Feit, Mark R. Kozlowski, Jean-Yves Natoli, Alexander M. Rubenchik, Lynn Matthew Sheehan, and Ming Yan "Single-beam photothermal microscopy: a new diagnostic tool for optical materials", Proc. SPIE 3578, Laser-Induced Damage in Optical Materials: 1998, (7 April 1999); https://doi.org/10.1117/12.344423
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser scattering

Scattering

Laser beam diagnostics

Laser induced damage

Signal detection

Defect detection

Microscopy

RELATED CONTENT


Back to Top