Paper
29 December 1998 Compensation of thermo-optical distortions in the active elements of high-power cw Nd:YAG lasers
S. T. Durmanov, Vladimir V. Lyubimov, Yu. P. Rudnitskiy, Grigoriy Smirnov, M. A. Kurin, Yanka I. Malashko, A. S. Rumjantsev
Author Affiliations +
Proceedings Volume 3682, Laser Optics '98: Solid State Lasers; (1998) https://doi.org/10.1117/12.334784
Event: Laser Optics '98, 1998, St. Petersburg, Russian Federation
Abstract
The main purpose of our investigations consists in creation the solid state laser with power approximately 500 W and high beam quality. The beam quality, as well known, is described with parameter M2, that characterizes the focusing properties of laser radiation. Notice that the high power technological lasers with lamp pumping have the typical value M2 from 20 to 100. It could be decreased by means of use the special technical methods of compensation of birefringence and aberrations in the induced thermal lenses of active elements.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. T. Durmanov, Vladimir V. Lyubimov, Yu. P. Rudnitskiy, Grigoriy Smirnov, M. A. Kurin, Yanka I. Malashko, and A. S. Rumjantsev "Compensation of thermo-optical distortions in the active elements of high-power cw Nd:YAG lasers", Proc. SPIE 3682, Laser Optics '98: Solid State Lasers, (29 December 1998); https://doi.org/10.1117/12.334784
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser resonators

Nd:YAG lasers

Mirrors

Lenses

Resonators

Polarization

High power lasers

RELATED CONTENT


Back to Top