Development of novel piezoresistive sensor

Zhongshen Lin; Weileun Fang

doi:10.1117/12.360500

31 August 1999 Development of novel piezoresistive sensor

Zhongshen Lin, Weileun Fang

Proceedings Volume 3876, Micromachined Devices and Components V; (1999) https://doi.org/10.1117/12.360500
Event: Symposium on Micromachining and Microfabrication, 1999, Santa Clara, CA, United States

Abstract

Piezoresistors have been used widely for various microsensors, such as accelerometers and pressure sensors. Conventionally, piezoresistive sensors are fabricated by placing the piezoresistors on the region where largest strain would occur. In order to satisfy the measurement sensitivity as well as the fabrication processes, the substrate underneath the microstructures are usually removed through the back-sided etching. Hence, the fabrication processes are complex and time-consuming. To solve this problem, this article intends to propose an alternative design for piezoresistive sensors. The approach is to form the piezoresistors behind the boundary of the microstructure by diffusion. Therefore, this piezoresistive sensor is compatible with front-side etch process and without depositing an additional polysilicon layer. The proposed design also provides the capability of integrating with various microactuators. In application of the proposed design, a micromachined cantilever was used to provide the strain field to the piezoresistive sensor. The feasibility of the sensor was verified by both simulation and experiment. According to the results predicted by the finite element analysis, the stress at the proposed sensing region is approximate one order of magnitude smaller than that at the end of the microstructure. In other words, a reasonable signal is still available at this region. During the experiment, silicon dioxide microcantilevers were fabricated, and piezoresistors were formed by diffusing n+ on silicon substrate. An experimental setup containing a micropositioner and a piezoelectric shaker was constructed. The output of piezoresistors was then measured when microcantilevers bending or vibrating.

Citation Download Citation

Zhongshen Lin and Weileun Fang "Development of novel piezoresistive sensor", Proc. SPIE 3876, Micromachined Devices and Components V, (31 August 1999); https://doi.org/10.1117/12.360500

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Piezoresistive sensors

Sensors

Etching

Silicon

Finite element methods

Semiconducting wafers

Actuators

Show All Keywords

Keywords/Phrases

Search In:

Publication Years