Paper
19 October 2000 Abrasion-resistant antireflection coating for plastics
Author Affiliations +
Abstract
Coating of plastics for optical applications is mostly intended to improve their mechanically durability and to provide a desired optical function. A potential layer system to realize an antireflection function and to improve the mechanical properties simultaneously in a combination of hard coating SiO2 with classical 4-layer antireflection system consisting of SiO2 and Ta2O5. Plasma-Ion Assisted Deposition (Plasma-IAD) at room temperature has been applied for coating experiments on PMMA and Polycarbonate. The temperature on a polymer substrate can reach a critical value in respect to its low thermal stability, if thick layers Ta2O5 have to be deposited. The increase of temperature is mainly determined by the radiation heat of electron beam evaporator. With needle optimization, an alternative coating design has been developed. The design is characterized by low thickness of high refractive index layers, which add up to less than about 5% of the total multilayer thickness. The high refractive index layers are almost evenly distributed over the whole stack. The total thickness of this kind of coating is adjustable between 800 nm and about 2600 nm. The mechanical properties of the coating deposited on plastics corresponds to that of a single SiO2 laser of the same thickness.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrike Schulz, Uwe B. Schallenberg, and Norbert Kaiser "Abrasion-resistant antireflection coating for plastics", Proc. SPIE 4094, Optical and Infrared Thin Films, (19 October 2000); https://doi.org/10.1117/12.404752
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Antireflective coatings

Polymethylmethacrylate

Refractive index

Resistance

Reflectivity

Hard coatings

Back to Top