Paper
21 November 2000 Development of CdZnTe pixel detectors for astrophysical applications
Author Affiliations +
Abstract
Over the last four years we have been developing imaging Cadmium Zinc Telluride pixel detectors optimized for astrophysical focusing hard X-ray telescopes. This application requires sensors with modest area (approximately 2 cm X 2 cm), relatively small (approximately less than 500 micrometer) pixels and sub-keV energy resolution. For experiments operating in satellite orbits, low energy thresholds of approximately 1 - 2 keV are also desirable. In this paper we describe the desired detector performance characteristics, and report on the status of our development effort. In particular, we present results from a prototype sensor with a custom low- noise VLSI readout designed to achieve excellent spectral resolution and good imaging performance in the 2 - 100 keV band
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fiona A. Harrison, Steven E. Boggs, Aleksey E. Bolotnikov, C. M. Hubert Chen, Walter R. Cook III, and Steven M. Schindler "Development of CdZnTe pixel detectors for astrophysical applications", Proc. SPIE 4141, Hard X-Ray, Gamma-Ray, and Neutron Detector Physics II, (21 November 2000); https://doi.org/10.1117/12.407574
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Hard x-rays

Prototyping

Spectral resolution

Space telescopes

X-ray telescopes

Image resolution

RELATED CONTENT

Wide-field hard x-ray survey telescope: ProtoEXIST1
Proceedings of SPIE (September 21 2007)
Current status of the Astro-H X-ray Telescope system
Proceedings of SPIE (August 31 2009)
Next-generation x-ray observatory
Proceedings of SPIE (September 01 1995)

Back to Top