Paper
18 August 2000 Fabrication of microlens arrays in CaF2 by ion milling
Author Affiliations +
Proceedings Volume 4179, Micromachining Technology for Micro-Optics; (2000) https://doi.org/10.1117/12.395680
Event: Micromachining and Microfabrication, 2000, Santa Clara, CA, United States
Abstract
Calcium Fluoride microlens arrays have been produced with the help of an ion milling transfer of photoresist lenses which have been fabricated by two different techniques (i) by a melting resist technique and (ii) gray scale lithography. Major technical problems connected with the ion milling transfer of the photoresist lenses in the CaF2 material are surface roughness enhancement and variation of the lens shape. We studied the ion-induced decomposition of CaF2 and the surface roughness equatio in dependence on different milling conditions. For the microlens patter transfer the ratio of etching rates of the photoresist and the CaF2 have been adjusted by gas admixture of nitrogen to the Ar sputtering gas. The angle dependence of the etching rates leads also to a changing of the lens profile. The effect of ion beam induced surface roughness and the accuracy of the transfer process is discussed.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dieter Flamm, Axel Schindler, Torsten Harzendorf, and Ernst-Bernhard Kley "Fabrication of microlens arrays in CaF2 by ion milling", Proc. SPIE 4179, Micromachining Technology for Micro-Optics, (18 August 2000); https://doi.org/10.1117/12.395680
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ions

Etching

Photoresist materials

Calcium

Microlens

Surface roughness

Sputter deposition

RELATED CONTENT

Fabrication of quartz microlens array
Proceedings of SPIE (June 09 2006)
Grayscale homogenizers in calcium fluoride
Proceedings of SPIE (February 06 2008)
Performance and measurements of refractive microlens arrays
Proceedings of SPIE (November 01 1991)
Evolution of a microlens surface under etching conditions
Proceedings of SPIE (December 15 1993)
Realization of fabricating microlens array in mass production
Proceedings of SPIE (September 06 1999)

Back to Top