Paper
3 November 1983 Edge Sensors For A Segmented Mirror
Terry S. Mast, George Gabor, Jerry E. Nelson
Author Affiliations +
Abstract
The measurement of the relative orientations of mirror segments is the basis for the active control of a segmented mirror. We describe a system of capacitive displacement sensors which will be used to make these measurements in the University of California Ten Meter Telescope. The global sensing system design and the control algorithm are summarized. The detailed mechanical and electronic designs of a sensor are described along with the performance of prototype sensors under a variety of tests. The relationship between the sensor characteristics and the image quality of the segmented mirror is described. The sensor output is 1 millivolt per nanometer of displacement. This sensitivity and the small noise, drift, and thermal sensitivity are adequate to allow essentially continuous figure control to the precision required for optical and infrared astronomy.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Terry S. Mast, George Gabor, and Jerry E. Nelson "Edge Sensors For A Segmented Mirror", Proc. SPIE 0444, Advanced Technology Optical Telescopes II, (3 November 1983); https://doi.org/10.1117/12.937989
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Mirrors

Image segmentation

Capacitors

Actuators

Telescopes

Control systems

RELATED CONTENT

The GTC project: preparing the first light
Proceedings of SPIE (June 23 2006)
Development of a test rig for the active control of...
Proceedings of SPIE (March 21 1997)
Segmented mirror control system hardware for CELT
Proceedings of SPIE (July 20 2000)
Cophasing methods for segmented mirrors
Proceedings of SPIE (July 20 2000)

Back to Top