Highly efficient tabletop optical parametric chirped pulse amplifier at 1 um

Igor Jovanovic; Christopher A. Ebbers; Brian J. Comaskey; Randal A. Bonner; Edward C. Morse

doi:10.1117/12.461371

1 April 2002 Highly efficient tabletop optical parametric chirped pulse amplifier at 1 μm

Igor Jovanovic, Christopher A. Ebbers, Brian J. Comaskey, Randal A. Bonner, Edward C. Morse

Proceedings Volume 4633, Commercial and Biomedical Applications of Ultrafast and Free-Electron Lasers; (2002) https://doi.org/10.1117/12.461371
Event: High-Power Lasers and Applications, 2002, San Jose, California, United States

Abstract

Optical parametric chirped pulse amplification (OPCPA) is a scalable technology for ultrashort pulse amplification. Its major advantages include design simplicity, broad bandwidth, tunability, low B-integral, high contrast, and high beam quality. OPCPA is suitable both for scaling to high peak power as well as high average power. We describe the amplification of stretched 100 fs oscillator pulses in a three-stage OPCPA system pumped by a commercial, single- longitudinal-mode, Q-switched Nd:YAG laser. The stretched pulses were centered around 1054 nm with a FWHm bandwidth of 16.5 nm and had an energy of 0.5nJ. Using our OPCPA system, we obtained an amplified pulse energy of up to 31 mJ at a 10 Hz repetition rate. The overall conversion efficiency from pump to signal is 6%, which is the highest efficiency obtained with a commercial tabletop pump laser to date. The overall conversion efficiency is limited due to the finite temporal overlap of the seed (3 ns) with respect to the duration of the pump (8.5 ns). Within the temporal window of the seed pulse the pump to signal conversion efficiency exceeds 20%. Recompression of the amplified signal was demonstrated to 310 fs, limited by the aberrations initially present in the low energy seed imparted by the pulse stretcher. The maximum gain in our OPCPA system is 6x10⁷, obtained through single passing of 40 mm of beta- barium borate. We present data on the beam quality obtained from our system (M²=1.1). This relatively simple system replaces a significantly more complex Ti:sapphire regenerative amplifier-based CPA system used in the front end of a high energy short pulse laser. Future improvement will include obtaining shorter amplified pulses and higher average power.

Citation Download Citation

Igor Jovanovic, Christopher A. Ebbers, Brian J. Comaskey, Randal A. Bonner, and Edward C. Morse "Highly efficient tabletop optical parametric chirped pulse amplifier at 1 μm", Proc. SPIE 4633, Commercial and Biomedical Applications of Ultrafast and Free-Electron Lasers, (1 April 2002); https://doi.org/10.1117/12.461371

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
9 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Crystals

Amplifiers

Pulsed laser operation

Ultrafast phenomena

Optical amplifiers

Q switched lasers

Laser crystals

Show All Keywords

Keywords/Phrases

Search In:

Publication Years