Paper
1 August 1984 A Real World Approach To Plastic Clad Silica (PCS) Fiber Terminations
David R. Maack, John J. Magera, Arthur J. Harvey
Author Affiliations +
Proceedings Volume 0479, Fiber Optic Couplers, Connectors, and Splice Technology; (1984) https://doi.org/10.1117/12.942796
Event: 1984 Technical Symposium East, 1984, Arlington, United States
Abstract
The use of plastic clad silica as a low cost, large core, high N.A. radiation hard, low loss optical fiber has been tempered by several unique termination constraints. These constraints are caused by the soft and relatively thick silicone cladding material which contributes to mechanical instability, low shear strength, poor concentricity, and higher losses when using termination techniques designed for glass/glass fiber systems. Specific methods developed for PCS usually require the user to accept a tradeoff between optical loss and mechanical stability of the termination. The results of this work indicates there are broad areas of real world optical system usage where these termination trade-offs are more than compensated for by the advantages. PCS fiber is an extremely viable and cost effective candidate for low bandwidth, short length (less than 1 Km) systems using inexpensive E-0 devices and connectors. And finally, because of some of its unique properties, it is highly probable PCS will be required for many of the Fiber Optic Sensors of the future.
© (1984) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David R. Maack, John J. Magera, and Arthur J. Harvey "A Real World Approach To Plastic Clad Silica (PCS) Fiber Terminations", Proc. SPIE 0479, Fiber Optic Couplers, Connectors, and Splice Technology, (1 August 1984); https://doi.org/10.1117/12.942796
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Connectors

Cladding

Shape memory alloys

Amplifiers

Fiber optics

Silicon

Aluminum

Back to Top