Minimum resolvable temperature difference measurements on undersampled imagers

Ronald G. Driggers; Van A. Hodgkin; Richard H. Vollmerhausen; Patrick O'Shea

doi:10.1117/12.487065

22 August 2003 Minimum resolvable temperature difference measurements on undersampled imagers

Ronald G. Driggers, Van A. Hodgkin, Richard H. Vollmerhausen, Patrick O'Shea

Proceedings Volume 5076, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XIV; (2003) https://doi.org/10.1117/12.487065
Event: AeroSense 2003, 2003, Orlando, Florida, United States

Abstract

Minimum Resolvable Temperature Difference (MRTD) is the primary measurement of performance for infrared imaging systems. Where Modulation Transfer Function (MTF) is a measurement of resolution and three-dimensional noise (or noise equivalent temperature difference) is a measurement of sensitivity, MRTD combines both measurements into a test of observer visual acuity through the imager. MRTD has been incorrectly applied to undersampled thermal imagers as a means for assessing the overall performance of the imager. The incorrect application of the MRTD (or just MRT) test to undersampled imagers includes testing to the half-sample (or Nyquist rate) of the sensor and calling the MRT unresolvable beyond this frequency. This approach is known to give poor predictions in overall system performance. Also, measurements at frequencies below the half-sample rate are strongly dependent on the phase between the sampling geometry and the four-bar target. The result is that very little information in the MRT measurement of an undersampled thermal imager is useful. There are a number of alternatives including Dynamic MRT (DMRT), Minimum Temperature Difference Perceived (MTDP), Triangle Orientation Discrimination (TOD), and objective MRT tests. The NVESD approach is to measure the MTF and system noise and to use these measurements in the MRT calculation to give good sensor performance predictions. This paper describes the problems with MRT for undersampled imagers, describes the alternative measurements, and presents the NVESD approach to MRT measurements.

Citation Download Citation

Ronald G. Driggers, Van A. Hodgkin, Richard H. Vollmerhausen, and Patrick O'Shea "Minimum resolvable temperature difference measurements on undersampled imagers", Proc. SPIE 5076, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XIV, (22 August 2003); https://doi.org/10.1117/12.487065

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available