Paper
10 November 2003 Direct laser cladding of Ni-based alloy powder for industrial applications
Rafal Jendrzejewski, Gerard Sliwinski, Ana Conde, Juan J. de Damborenea
Author Affiliations +
Proceedings Volume 5120, XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; (2003) https://doi.org/10.1117/12.515844
Event: XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2002, Wroclow, Poland
Abstract
Coatings of the nickel-based Metco 16C on the chromium steel substrate of a composition designed for the steam turbine blades are produced in a direct laser cladding process. A cw 1.2 kW CO2 laser stand equipped with a multi-stream nozzle mounted co-axially with the focusing optics is applied. Experiments are performed for the non-preheated as well as the preheated base material. Differences in microstructure, chemical composition, and in the cracking susceptibility between coatings produced on preheated (800-900K) and non-preheated substrates are analyzed by means of scanning electron microscopy (SEM) and the Energy Dispersive X-ray Spectroscopy (XEDS). Results indicate a significant improvement of the clad quality with the increase of preheating temperature. The presence of Fe in the coating is ascribed to migration from substrate due to preheating.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rafal Jendrzejewski, Gerard Sliwinski, Ana Conde, and Juan J. de Damborenea "Direct laser cladding of Ni-based alloy powder for industrial applications", Proc. SPIE 5120, XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, (10 November 2003); https://doi.org/10.1117/12.515844
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Iron

Nickel

Chromium

Chemical analysis

Scanning electron microscopy

Optical coatings

RELATED CONTENT

Metal reduction at bulk chemical filtration
Proceedings of SPIE (March 27 2017)
Obtaining of micro powder coatings from Fe Ni and Fe...
Proceedings of SPIE (December 11 2019)
Laser cladding of CO-based protective coatings on Cr-steel
Proceedings of SPIE (November 04 2003)
Motor shaft repairing by laser cladding
Proceedings of SPIE (September 30 1996)
Results of micro analyses of Ni Cr Si laser clad...
Proceedings of SPIE (March 23 2005)
Laser cladding of Ni and Co based coatings for...
Proceedings of SPIE (October 06 2003)

Back to Top