Prototyping of miniature plastic imaging lens

Jukka-Tapani Makinen; Janne Aikio; Veli-Pekka Putila; Kimmo Keranen; Pentti Karioja; Timo T. Kolehmainen; Janne Haavisto

doi:10.1117/12.503480

22 January 2004 Prototyping of miniature plastic imaging lens

Jukka-Tapani Makinen, Janne Aikio, Veli-Pekka Putila, Kimmo Keranen, Pentti Karioja, Timo T. Kolehmainen, Janne Haavisto

Author Affiliations +

Proceedings Volume 5178, Optical Modeling and Performance Predictions; (2004) https://doi.org/10.1117/12.503480
Event: Optical Science and Technology, SPIE's 48th Annual Meeting, 2003, San Diego, California, United States

Abstract

The prototyping process of miniaturized plastic imaging lens is described. The sequence is divided into five phases: specification, optics design, optomechanical design, manufacturing and characterization. During specification, the optical and mechanical requirements of the lens are defined. In the optical design phase, the lens is optimized, and a tolerance analysis is carried out. Simulation tools, especially, an image quality simulator, can be used to visualize and verify the performance of the design. Mechanical design is performed considering the geometrical specifications and optical tolerances of the system. In addition, stray light analysis is carried out to verify the optical performance of the optomechanics. Plastic optics are particularly vulnerable to stray light due to the integrated mountings, which provide additional paths for unwanted light. If the prototype is used for preliminary performance evaluation of a future product, the differences between prototype and mass manufacturing methods need to be considered carefully. After the lenses are manufactured they are characterized, and the experimental results are compared with the original specifications and estimations obtained from the previous design verification simulations. New error analysis simulations can be performed in order to pinpoint faults in manufactured modules. If the performance of the prototype is not sufficient, a new prototyping iteration circle is needed. The whole process is described and analyzed using a miniature, plastic imaging lens as an example, but it can also be applied to other optical prototyping tasks.

Citation Download Citation

Jukka-Tapani Makinen, Janne Aikio, Veli-Pekka Putila, Kimmo Keranen, Pentti Karioja, Timo T. Kolehmainen, and Janne Haavisto "Prototyping of miniature plastic imaging lens", Proc. SPIE 5178, Optical Modeling and Performance Predictions, (22 January 2004); https://doi.org/10.1117/12.503480

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available