Paper
15 December 2003 Traveling-wave electrode design for a directional-coupler-based polymeric electro-optical modulator
Qingjun Zhou, Ray T. Chen
Author Affiliations +
Proceedings Volume 5260, Applications of Photonic Technology 6; (2003) https://doi.org/10.1117/12.543442
Event: Applications of Photonic Technology, 2003, Quebec City, Québec, Canada
Abstract
In order to find the optimal traveling-wave electrode formation for directional-coupler-based polymeric modulators, four electrode structures are evaluated by simulating the modulator's driving voltages and bandwidths, and by experimentally measuring their driving voltages. First, the characteristic parameters of these four structures are analyzed. Then, the driving votlages for modulators using these four structures are computed using beam propagation method, and their bandwidths are obtained using small-signal analysis. Finally modulators are fabricated using DR1/PMMA and CLD1/APC respectively, and their driving voltages for different electode structures are measured.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qingjun Zhou and Ray T. Chen "Traveling-wave electrode design for a directional-coupler-based polymeric electro-optical modulator", Proc. SPIE 5260, Applications of Photonic Technology 6, (15 December 2003); https://doi.org/10.1117/12.543442
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Modulators

Waveguides

Polymers

Electro optic polymers

Modulation

Electrooptic modulators

RELATED CONTENT

Broadband low-drive voltage polymer electro-optic modulator
Proceedings of SPIE (February 28 2012)
High-bandwidth polymer in-line fiber modulator
Proceedings of SPIE (October 13 1997)
RF photonics and polymer devices
Proceedings of SPIE (November 03 1998)

Back to Top